0OperatingAdjusting the zoom (Digital). Press the ZOOM +/- button on the remote control.A dialog will appear on the screen to aid you inadjusting the zoom.. Use the ZOOM buttons +/- to adjust the zoom.To close the dialog and complete this operation, don’tperform operation for a few seconds.Searching an input signal. Press the SEARCH button on the remote control.The projector will begin to check its input ports in orderto find any input signals.Then when an input is found, the projector will stop searchingand display the image. If no signal is found, the projector willreturn to the state selected before the operation.RGB RGB S-VIDEO VIDEOVIDEO RGB SEARCHSTANDBY/ONFREEZEOFFONMAGNIFYASPECT AUTO BLANKHOME PAGE UPPAGE DOWNEND MUTEVOLUMEKEYSTONEPOSITIONESCENTERMENURESETSelecting an aspect ratio. Press the ASPECT button on the remote control.Each time you press the button, the projector switches the modes for aspectratio in turn. At a RGB signalNORMAL 4:3 6:9 At a video signal /no signal4:3 6:9● The NORMAL mode keeps the original aspect ratio of the signal.● At a HDTV component video signal of 1125i (1080i) or 750p (720p), only 16:9mode can be selected.● Performing the automatic adjustment initializes the aspect ratio setting.Adjusting the focus. Use the focus ring to focus on the picture.Adjusting the zoom (Optical). Use the zoom knob to adjust the screen size.VIDEO RGB SEARCHFREEZEOFFONMAGNIFYASPECTSTANDBY/ONAUTO BLANKMUTEVOLUMEKEYSTONEPOSITIONESCENTERMENURESETZOOM+-VIDEO RGB SEARCHFREEZEOFFONMAGNIFYASPECTSTANDBY/ONAUTO BLANKMUTEVOLUMEKEYSTONEPOSITIONESCENTERMENURESETZOOM+-VIDEO RGB SEARCHFREEZEOFFONMAGNIFYASPECTSTANDBY/ONAUTO BLANKMUTEVOLUMEKEYSTONEPOSITIONESCENTERMENURESETZOOM+-VIDEO RGB SEARCHFREEZEOFFONMAGNIFYASPECTSTANDBY/ONAUTO BLANKMUTEVOLUMEKEYSTONEPOSITIONESCENTERMENURESETZOOM+-VIDEO RGB SEARCHFREEZEOFFONMAGNIFYASPECTSTANDBY/ONAUTO BLANKMUTEVOLUMEKEYSTONEPOSITIONESCENTERMENURESETZOOM+-VIDEO RGB SEARCHFREEZEOFFONMAGNIFYASPECTSTANDBY/ONAUTO BLANKMUTEVOLUMEKEYSTONEPOSITIONESCENTERMENURESETZOOM+-