3M X15I - Digital Projector XGA LCD Operator's Manual

Also see for Multimedia Projector X15i: Brochure & specs Quick start guide Safety guide Operator's guide

3M X15I - Digital Projector XGA LCD Operator's Manual Manual pdf 26 page image

6Multifunctional settingsEASY MENUItem DescriptionASPECT Using the buttons ◄/► switches the mode for aspect ratio.See the item ASPECT of section IMAGE menu. (31, 20)ZOOM Using the buttons ◄/► adjusts the zoom.See the item ZOOM of section SETUP menu. (35, 20)KEYSTONE Using the buttons ◄/► corrects the keystone distortion.See the item KEYSTONE of section SETUP menu. (35, 21)MODEUsing the buttons ◄/► switches the mode of picture type. Themodes of picture type are combinations of a mode of GAMMA(28) and a mode of COLOR TEMP (29). Choose a suitablemode according to the projected source.NORMAL ó CINEMA ó DYNAMICNORMAL: (COLOR TEMP = MIDDLE) + (GAMMA = # DEFAULT)CINEMA: (COLOR TEMP = LOW) + (GAMMA = # DEFAULT)DYNAMIC: (COLOR TEMP = HIGH) + (GAMMA = #3 DEFAULT)• When the combination of GAMMA and COLOR TEMP differs frompre-assigned modes above, the display on the menu for the MODEis “CUSTOM”.BRIGHT Using the buttons ◄/► adjusts the brightness.See the item BRIGHT of section PICTURE menu. (28)CONTRAST Using the buttons ◄/► adjusts the contrast.See the item CONTRAST of section PICTURE menu. (28)COLORUsing the buttons ◄/► adjusts the strength of whole color.See the item COLOR of section PICTURE menu. (29)• This item can be chosen only at a video signal.TINTUsing the buttons ◄/► adjusts the tint.See the item TINT of section PICTURE menu. (29)• This item can be chosen only at a video signal.With the EASY MENU, items shown in the table below canbe performed.Choose an item using the cursor buttons ▲/▼ on theprojector or remote control. Then perform it referring to thefollowing table.EASY MENUASPECTZOOMKEYSTONEMODEBRIGHTCONTRASTCOLORTINTSHRPNESSWHISPERMIRRORRESETFILTER TIMELANGUAGE4:3+0+0NORMAL+0+0+0+0+3NORMALNORMAL0ENGLISHGo To Advance Menu...