3M X15I - Digital Projector XGA LCD Operator's Manual

Also see for Multimedia Projector X15i: Brochure & specs Quick start guide Safety guide Operator's guide

3M X15I - Digital Projector XGA LCD Operator's Manual Manual pdf 46 page image

46MaintenanceWARNING ►Do not take care of the projector during use or immediately afteruse. Handling while the projector is in a high temperature could cause a burn and/or malfunction to the projector. Before operating, make sure that the power switch isoff, that the power cord is not plugged in, and that the projector is cool adequately.►Never try to care for the inside of the projector personally. Doing is sodangerous.►Avoid wetting the projector or inserting liquids in the projector. It could resultin a fire, an electric shock, and/or malfunction to the projector.• Don’t put a container containing water, cleaner or chemicals near theprojector.• Don’t use aerosols or sprays.CAUTION ►Please take right care of the projector according to thefollowing. Incorrect care could cause not only an injury but adverse influencesuch as discoloration, peeling paint, etc.• Do not use cleaner or chemicals other than those listed below.• Do not polish or wipe with hard objects.Inside of the projectorIn order to ensure the safe use of your projector, please have it cleaned andinspected by your dealer about once every year.Caring for the lensIf the lens is flawed, soiled or fogged, it could cause deterioration of displayquality. Please take care of the lens, being cautious of the handling.. Turn the projector off, and unplug the power cord. Allow the projector to coolsufficiently.. After making sure that the projector is cool adequately, lightly wipe the lenswith a commercially available lens-cleaning wipe. Do not touch the lensdirectly with your hand.Caring for the cabinet and remote controlIncorrect care could have adverse influence such as discoloration, peeling paint,etc.. Turn the projector off, and unplug the power cord. Allow the projector to coolsufficiently.. After making sure that the projector is cool adequately, lightly wipe with gauzeor a soft cloth.If soiling is severe, dip soft cloth in water or a neutral cleaner dilute in water,and wipe lightly after wringing well. Then, wipe lightly with a soft, dry cloth.Other care