3ware Escalade Storage Switch User Guide66 www.3ware.comInstalling the storage switch on systems thatboot from a different deviceMaterials required:• 3ware Windows driver installation diskette• 3ware CD-ROMCreate disk arraysRefer to the 3ware Hardware Installation and 3ware Disk ArrayConfiguration Utility chapters.Install the 3ware driverAs a Plug and Play device Windows 98/ME will recognize theEscalade Storage Switch and automatically bring up the Add NewHardware Wizard, which will guide you in installing the new3ware driver (see Figure 27). When the Add New Hardware Wiz-ard screen appears continue to the Install/Update 3ware driver sec-tion. Perform the following steps only if this Wizard does notappear on your screen or was cancelled for some reason:1 Log in after Windows installation is complete and insert the3ware Windows driver installation diskette.2 From the Start menu, select Setting, then Control Panel.3 Double click on Add New Hardware icon. When the Add NewHardware wizard lists devices that need to be installed, selectthe SCSI Controllers.4 Continue to the Install/Update 3ware driver section.
