User Manual of Digital Video Recorder1459.4 Configuring Network DetectionPurpose:You can obtain network connecting status of DVR through the network detection function, including networkdelay, packet loss, etc.9.4.1 Testing Network Delay and Packet LossSteps:1. Enter the Network Traffic interface.Menu > Maintenance > Net Detect2. Click the Network Detection tab to enter the Network Detection menu.Figure 9. 34 Network Detection Interface3. Select a NIC to test network delay and packet loss.4. Enter the destination address in the text field of Destination Address.5. Click the Test button to start testing network delay and packet loss. The testing result pops up on thewindow. If the testing is failed, the error message box will pop up as well.Figure 9. 35 Testing Result of Network Delay and Packet Loss9.4.2 Exporting Network PacketPurpose:By connecting the DVR to network, the captured network data packet can be exported to USB-flash disk, SATAand other local backup devices.Steps:1. Enter the Network Traffic interface.Menu > Maintenance > Net Detect2. Click the Network Detection tab to enter the Network Detection interface.Available from A1 Security Cameraswww.a1securitycameras.com email: sales@a1securitycameras.com
