User Manual of Digital Video Recorder433.4 Adjusting Live View SettingsPurpose:Live View settings can be customized according to different needs. You can configure the output interface,dwell time for screen to be shown, mute or turning on the audio, the screen number for each channel, etc.Steps:1. Enter the Live View Settings interface.Menu> Configuration> Live ViewFigure 3. 6 Live View-GeneralThe settings available in this menu include:• Video Output Interface: Designates the output to configure the settings for. Outputs includeHDMI/VGA and CVBS (depends on the model).• Live View Mode: Designates the display mode to be used for Live View.• Dwell Time: The time in seconds to dwell between switching of channels when enabling auto-switchin Live View.• Enable Audio Output: Enables/disables audio output for the selected camera in the live view mode.• Event Output: Designates the output to show event video; if available, you can select a differentvideo output interface from the Video Output Interface when an event occurs.• Full Screen Monitoring Dwell Time: The time in seconds to show alarm event screen.2. Set the camera order.1) Select View tab.Figure 3. 7 Live View- Camera Order2) Click a window to select it, and then double-click a camera name in the camera list you would like todisplay. Setting an „X‟ means the window will not display any camera.3) You can also click to start live view of all channels in order and click to stop live view ofall channels. Click or to go to the previous or next page.4) Click the Apply button.Available from A1 Security Cameraswww.a1securitycameras.com email: sales@a1securitycameras.com
