User Manual of Digital Video Recorder17913.2 Configuring General SettingsPurpose:You can configure the output resolution, system time, mouse pointer speed, etc.Steps:1. Enter the General Settings interface.Menu > Configuration > General2. Select the General tab.Figure 13. 1 General Settings Interface3. Configure the following settings:• Language: The default language used is English.• CVBS Output Standard: Select the CVBS output standard to NTSC or PAL, which must be the samewith the video input standard (for ST series only).• Resolution: Select the output resolution, which must be the same with the resolution of the VGA/HDMIdisplay.• Time Zone: Select the time zone.• Date Format: Select the date format.• System Date: Select the system date.• System Time: Select the system time.• Mouse Pointer Speed: Set the speed of mouse pointer; 4 levels are configurable.• Enable Wizard: Enable/disable the Wizard when the device starts up.• Enable ID Authentication: Enable/disable the use of the login password.4. Click the Apply button to save the settings.Available from A1 Security Cameraswww.a1securitycameras.com email: sales@a1securitycameras.com
