JANUARY 2010 - TD 220a DEPLOYMENT GUIDE, RDCP600 Page 57Reliable solutions2.2.1 Deployment GuideTap the Wizard button in the DeploymentSetup to set up the configuration or do theconfiguration in Start menu → Deployment Setup→ Edit → WaveRefer Figure 2-4 for an illustration of the Waveconfiguration.Select Acoustic based wave from the Wavemodule selection.Press the Acoustic wave tab for further setup.Figure 2-5 shows an overview of the timingsequence and number of samples collected for asingle wave measurement using the currenttiming scheme.The Acoustic wave samples are changedaccording to the Acoustic wave duration, whichis set in Timing Configuration, refer Figure 2-6.It is common to set the acoustic wave duration toabout 15-20 minutes (1800 – 2400 samples)Number of samples equals can be calculated asthe Acoustic wave duration in seconds x 2.Figure 2-4 Acoustic based wave.Figure 2-5 Recording interval.
