AAF OptiFlo RC Series Installation, Operation And Maintenance Manual
                               | |
Contents
| 
5GDED-IOM-215-A1 INTRODUCTIONThis document contains the information necessary to properly receive, assemble,install, operate, and maintain the AAF® OptiFlo® RC filter system and filters. The purchaser,installer, and operator of the filter system MUST read and comply with this document in itsentirety prior to installation of the equipment and its operation. Failure to comply with therequirements of this manual may void the product warranty. The information and guidelinescontained in this manual are not exhaustive, and additional or different precautions,measures, training, etc. may be needed depending on the specific circumstances.CAUTIONThese instructions are specific to the AAF OptiFlo RC filter system and filters. Allancillary tasks including, but not limited to, electrical and mechanical work,equipment handling, and safety procedures must be performed in accordance withindustry accepted practice and all relevant local, state, and federal governmentcodes, laws, and policies.2 SAFETY2.1 Safety statementThe air cleaning equipment supplied by AAF International ranges from very largemultiple-component assemblies which require significant and complex, rigging, handlingand assembly on-site, to small compact assemblies that are easily handled andmaneuvered. In addition to size, many of the dust collectors will require electricalconnections, compressed air connections, and will feature high speed rotating equipment.At all times, when dealing with industrial equipment such as dust collectionequipment personnel safety must be the highest priority of all involved, from riggers,installers, operators, users, and maintenance personnel. Those responsible on-site shallreview the details of the equipment beforehand and develop a plan for dealing with allstages of the installation from receipt of the equipment on-site to start-up, commissioning,and hand-over. All applicable health, safety, and environmental (“HSE”) rules, regulations,and legislation shall be fully complied with at all times.2.2 Safe working practices and staff trainingAAF International is fully committed to the safety of its employees and those of itscustomers. In this spirit, the following guidelines are offered for the consideration of thoseresponsible:All personnel shall receive safety training specific to the site, the task, and theconditions under which the work will be conducted. |
Related manuals for AAF OptiFlo 2RC16
This manual is suitable for:
OptiFlo 2RC16OptiFlo 2RC24OptiFlo 2RC4OptiFlo 2RC8OptiFlo 3RC12OptiFlo 3RC24OptiFlo 3RC36OptiFlo 3RC48OptiFlo 3RC6OptiFlo 3RC60OptiFlo 4RC11OptiFlo 4RC16OptiFlo 4RC32OptiFlo 4RC48OptiFlo 4RC64OptiFlo 4RC80OptiFlo 4RC96OptiFlo 5RC100OptiFlo 5RC120OptiFlo 5RC140OptiFlo 5RC160OptiFlo 5RC180OptiFlo 5RC20OptiFlo 5RC40OptiFlo 5RC60OptiFlo 5RC80OptiFlo RC Series
manualsdatabase
Your AI-powered manual search engine