ABB ACQ550-x1-06A6-2 User Manual

Contents

ABB ACQ550-x1-06A6-2 User Manual Manual pdf 251 page image

ACQ550-U1 User’s Manual 251DiagnosticsDiagnosticsWARNING! Do not attempt any measurement, parts replacement or other serviceprocedure not described in this manual. Such action will void the warranty, mayendanger correct operation and increase downtime and expense.WARNING! All electrical installation and maintenance work described in this chaptershould only be undertaken by qualified service personnel. The safety instructions inchapter Safety on page 5 must be followed.Diagnostic displaysThe drive detects error situations and reports them using:• the green and red LED on the body of the drive• the status LED on the control panel (if an ACQ Control Panel is attached to thedrive)• the control panel display (if a control panel is attached to the drive)• the Fault Word and Alarm Word parameter bits (parameters 0305 to 0309). SeeGroup 03: FB ACTUAL SIGNALS on page 89 for the bit definitions.The form of the display depends on the severity of the error. You can specify theseverity for many errors by directing the drive to:• ignore the error situation• report the situation as an alarm• report the situation as a fault.Red – FaultsThe drive signals that it has detected a severe error, or fault, by:• enabling the red LED on the drive (LED is either steady on or blinking)• showing the steady red status LED on the control panel (if attached to the drive)• setting an appropriate bit in a Fault Word parameter (0305 to 0307)• overriding the control panel display with the display of a fault code in the Faultmode• stopping the motor (if it was on).The fault code on the control panel display is temporary. Pressing any of thefollowing keys removes the fault message: MENU, ENTER, UP, or DOWN key. Themessage reappears after a few seconds if the control panel is not touched and thefault is still active.