ABB ACQ550-x1-06A6-2 User Manual

Contents

ABB ACQ550-x1-06A6-2 User Manual Manual pdf 299 page image

ACQ550-U1 User’s Manual 299Technical dataApplicable standardsDrive compliance with the following standards is identified by the standard “marks”on the type designation label.CE markingA CE mark is attached to the drive to verify that the drive follows the provisions of theEuropean Low Voltage and EMC Directives.Note: The 600 V ACQ550-U1 drives are not CE approved.Compliance with the EMC DirectiveThe Directive defines the requirements for immunity and emissions of electricalequipment used within the European Union. The EMC product standard (IEC/EN61800-3 [2004]) covers requirements stated for drives.Compliance with IEC/EN 61800-3 (2004)See page 301.C-Tick markingThe drive carries C-Tick marking.Mark Applicable standardsEN 50178 (1997) Electronic equipment for use in power installationsIEC/EN 60204-1 (2005) Safety of machinery. Electrical equipment of machines.Part 1: General requirements. Provisions for compliance: Thefinal assembler of the machine is responsible for installing:• an emergency-stop device• a supply disconnecting device.IEC/EN 60529 (2004) Degrees of protection provided by enclosures (IP code)IEC 60664-1 (2002) Insulation coordination for equipment within low-voltagesystems. Part 1: Principles, requirements and testsIEC/EN 61800-5-1 (2003) Adjustable speed electrical power drive systems.Part 5-1: Safety requirements. Electrical, thermal and energyIEC/EN 61800-3 (2004) Adjustable speed electrical power drive systems.Part 3: EMC requirements and specific test methodsIEC/EN 61000-3-12 Electromagnetic compatibility (EMC).Part 3-12: Limits - Limits for harmonic currents produced byequipment connected to public low-voltage systems with inputcurrent > 16 A and = 75 A per phaseIEC/EN 61800-3 (2004) Adjustable speed electrical power drive systems.Part 3: EMC requirements and specific test methodsUL 508C UL Standard for Safety, Power Conversion Equipment, thirdeditionC22.2 No. 14 CSA Standard for Industrial Control Equipment (for ACQ550-U1drives only)