Actual signals and parameters 167Actual signals in the short parameter viewParameters in the short parameter viewActual signals in the short parameter viewNo. Name/Value Description FbEq04 FAULT HISTORY Fault history (read-only). See group 04 FAULT HISTORY inthe list of all parameters.0401 LAST FAULT Code of the latest fault. 1 = 1Parameters in the short parameter viewNo. Name/Value Description Def/FbEq11 REFERENCESELECT Panel reference type, external control location selection andexternal reference sources and limits. See group 11REFERENCE SELECT in the list of all parameters.1105 REF1 MAX Defines the maximum value for external reference REF1. E: 50.0 HzU: 60.0 Hz12 CONSTANTSPEEDS Constant speed (drive output frequency) selection andvalues. See group 12 CONSTANT SPEEDS in the list of allparameters.1202 CONSTSPEED 1 Defines constant drive output frequency 1. E: 5.0 HzU: 6.0 Hz1203 CONSTSPEED 2 Defines constant drive output frequency 2. E: 10.0 HzU: 12.0 Hz1204 CONSTSPEED 3 Defines constant drive output frequency 3. E: 15.0 HzU: 18.0 Hz13 ANALOG INPUTS Analog input signal processing. See group 13 ANALOGINPUTS in the list of all parameters.1301 MINIMUM AI1 Defines the minimum %-value that corresponds to minimummA/(V) signal for analog input AI1. 1.0%14 RELAY OUTPUTS Status information indicated through relay output, and relayoperating delays. See group 14 RELAY OUTPUTS in the listof all parameters.1401 RELAYOUTPUT 1 Selects a drive status indicated through relay output RO 1. FAULT(-1)16 SYSTEMCONTROLSParameter view, Run enable, parameter lock etc. See group16 SYSTEM CONTROLS in the list of all parameters.1611 PARAMETERVIEWSelects the parameter view, ie which parameters are shownon the control panel.SHORTVIEW20 LIMITS Drive operation limits. See group 20 LIMITS in the list of allparameters.2008 MAXIMUMFREQDefines the maximum limit for the drive output frequency. E: 50.0 HzU: 60.0 Hz21 START/STOP Start and stop modes of the motor. See group 21START/STOP in the list of all parameters.2102 STOPFUNCTIONSelects the motor stop function. COAST
