Technical data 127Auxiliary circuit power consumptionCabinet heater (option+G300)100 WMaterialsCabinet Hot-dip zinc coated 1.5 mm thick steel sheet (thickness of coating approximately20 micrometers). Polyester thermosetting powder coating (thicknessapproximately 80 micrometers) on visible surfaces, color RAL 7035 and RAL9017. PC/ABS 3 mm, color NCS 1502-Y (RAL 9002 / PMS 1C Cool Grey).Busbars Tin-plated copperAir filters of IP54 drives Inlet (door): airComp 300-50288 mm x 521 mm (ABB code: 64640194)688 mm x 521 mm (ABB code 64748017)Outlet (roof): airTex G1502 pcs: 398 mm x 312 mm (ABB code: 64722166)Fire safety of materials(IEC 60332-1)Insulating materials and non-metallic items mostly self-extinctivePackage Standard package:• timber, polyethylene sheet (thickness 0.2 mm), stretch film (thickness0.023 mm), PP tape, PET strap, sheet metal (steel)• for land and air transport when planned storage time is less than 2 months orwhen storage can be arranged in clean and dry conditions less than 6 months• can be used when products will not be exposed to corrosive atmosphereduring transport or storageContainer package:• timber, VCI sheet film (PE, thickness 0.15 mm), VCI stretch film (PE,thickness 0.04 mm), VCI emitter bags, PP tape, PET strap, sheet metal (steel)• for sea transport in containers• recommended for land and air transport when storage time prior to installationexceeds 6 months or storage is arranged in partially weather-protectedconditionsSeaworthy package:• timber, plywood, VCI sheet film (PE, thickness 0.15 mm), VCI stretch film (PE,thickness 0.04 mm), VCI emitter bags, PP tape, PET strap, sheet metal (steel)• for sea transport with or without containerization• for long storage periods in environments where roofed and humidity-controlled storage cannot be arrangedCabinets are fastened to the pallet with screws and braced from the top end tothe package walls to prevents swaying inside the package. Package elementsare attached together with screws. For handling the packages, see sectionMoving and unpacking the drive on page 41.Disposal The main parts of the drive can be recycled to preserve natural resources andenergy. Product parts and materials should be dismantled and separated.Generally all metals, such as steel, aluminum, copper and its alloys, andprecious metals can be recycled as material. Plastics, rubber, cardboard andother packaging material can be used in energy recovery. Printed circuit boardsand DC capacitors (C1-1 to C1-x) need selective treatment according toIEC 62635 guidelines. To aid recycling, plastic parts are marked with anapproppriate identification code.Contact your local ABB distributor for further information on environmentalaspects and recycling instructions for professional recyclers. End of lifetreatment must follow international and local regulations.
