Mechanical installation 47 Attaching methodsAttach the cabinet to the floor from the front and rear edge by using clamps delivered withthe drive, or bolt the cabinet to the floor through the holes inside if they are accessible.Alternative 1 – ClampingAlternative 2 – Using the holes inside the cabinet1. Insert the clamps into the twin slots along the frontand rear edges of the cabinet frame body and attachthem to the floor with a bolt. The recommendedmaximum distance between the clamps in the frontedge is 800 mm (31.5”).2. If floor mounting from back is not possible, attach thecabinet at the top to wall with L-brackets (not includedin the delivery) using the lifting lug attaching holes.1. Attach the cabinet to the floor through the bottomattaching holes with M10 to M12 (3/8” to 1/2”) bolts.The recommended maximum distance between thefront edge attaching points is 800 mm (31.5”).2. If the back attaching holes are not accessible, attachthe cabinet at the top to wall with L-brackets (notincluded in the delivery) using the lifting lug attachingholes.1Clamp dimensionsM16M16