—ABB INDUSTRIAL DRIVESACS800-31 drives (5.5 to 110 kW)ACS800-U31 drives (7.5 to 125 hp)Hardware manual

ABB ACS800-31 Hardware Manual

ACS800 Single Drive Manuals

What this chapter contains

Installation and maintenance work

Grounding

Mechanical installation and maintenance

Printed circuit boards

Operation

Permanent magnet motor

Installation and commissioning flowchart

Inquiries

Terms

AC voltage and current waveforms

Main circuit and control interfaces diagram

Fieldbus control of the line-side converter

Connection diagram of the RMIO board in the line-side converter

Type code

Unpacking the unit

Moving the unit

Before installation

Mounting the drive on the wall

Preventing cooling air recirculation

Unit above another

Protecting the motor insulation and bearings

Requirements table

Permanent magnet synchronous motor

Supply connection

Thermal overload and short-circuit protection

Short-circuit protection

Ground fault protection

Prevention of Unexpected Start

Selecting the power cables

Alternative power cable types

Additional US requirements

Equipment connected to the motor cable

Protecting the relay output contacts and attenuating disturbances in case of inductive loads

Selecting the control cables

Connection of a motor temperature sensor to the drive I/O

Control cable ducts

IT (ungrounded) systems

Connecting the power cables

Conductor stripping lengths

Wall installed units (US version)

Warning sticker

Connecting the control cables

degrees grounding

Cabling of I/O and fieldbus modules

Fastening the control cables and covers

Circuit diagram

Dimensional drawing

Note on external power supply

External control connections (non-US)

External control connections (US)

RMIO board specifications

Relay outputs

Control panel

To control the motor-side converter

Parameters

ACS800-31/U31 specific parameters in the IGBT Supply Control Program

AUTOMATIC RESET

Fixed parameters with the ACS800-31 and ACS800-U31

Heatsink

Fan replacement (R5, R6)

Replacement (R6)

IEC data

Symbols

Mains cable fuses

Cable types

NEMA data

Input cable fuses

Input power connection

Motor connection

Ambient conditions

Materials

CE marking

Second environment (drive of category C3)

C-tick" marking

UL/CSA markings

Dimensional drawings

ACS800-31

ACS800-U31