168 Technical dataAtmospheric pressure 70 to 106 kPa0.7 to 1.05atmospheres70 to 106 kPa0.7 to 1.05atmospheres60 to 106 kPa0.6 to 1.05atmospheresVibration (IEC 60068-2) Max. 1 mm(0.04 in.)(5 to 13.2 Hz),max. 7 m/s2(23 ft/s2 )(13.2 to 100 Hz)sinusoidalMax. 1 mm(0.04 in.)(5 to 13.2 Hz),max. 7 m/s 2(23 ft/s 2 )(13.2 to 100 Hz)sinusoidalMax. 3.5 mm(0.14 in.)(2 to 9 Hz),max. 15 m/s 2(49 ft/s 2 )(9 to 200 Hz)sinusoidalShock (IEC 60068-2-27) Not allowed Max. 100 m/s2(330 ft./s 2 ), 11 msMax. 100 m/s 2(330 ft./s 2 ), 11 msFree fall Not allowed 100 mm (4 in.) forweight over 100kg (220 lb)100 mm (4 in.) forweight over 100kg (220 lb)MaterialsDrive enclosure • PC/ABS 3 mm, color NCS 1502-Y (RAL 9002 / PMS 1CCool Grey) and RAL 9017• PC+10%GF 3.0mm, Color RAL 9017 (in frames R1 toR3 only)• hot-dip zinc coated steel sheet 1.5 to 2.5 mm, thicknessof coating 100 micrometers, color NCS 1502-YPackage Plywood and cardboard. Foam cushions PP-E, bands PP.Disposal The main parts of the drive can be recycled to preservenatural resources and energy. Produt parts and materialsshould be dismantled and separated.Generally all metals, such as steel, aluminum, copper andits alloys, and precious metals can be recycled asmaterial. Plastics, rubber, cardboard and other packagingmaterial can be used in energy recovery. Printed circuitboards and DC capacitors (C1-1 to C1-x) need selectivetreatment according to IEC 62635 guidelines. To aidrecycling, plastic parts are marked with an approppriateidentification code.Contact your local ABB distributor for further informationon environmental aspects and recycling instructions forprofessional recyclers. End of life treatment must followinternational and local regulations.
