Safety10 FEX300, FEX500 OI/FEX300/FEX500-EN1.6.2 Name plateImportant (Notice)An additional document with Ex safety instructions is available for measuring systems that areused in explosion hazardous areas. As a result, it is crucial that the specifications and data itlists are also observed.1.6.2.1 Name plate for compact designFig. 1: Compact device1 Model number (for more detailed information aboutthe technical design, refer to the data sheet or theorder confirmation)2 Order no.3 Meter size and nominal pressure rating4 Material: Flange/lining/electrode5 Client-specific TAG number (if specified)6 T med = maximum permissible fluid temperatureTamb = maximum permissible ambient temperature7 Protection type according to EN 605298 Calibration value Qmax DN9 Calibration value Ss (span)Calibration value Sz (zero point)10Communications protocol of transmitter11 Software version12Year of manufacture13CE mark14Serial number for identification by the manufacturer15Supplementary information: EE = groundingelectrodes, TFE = partial filling electrode16Accuracy to which the unit was calibrated (e.g., 0.2%of rate)17Excitation frequency of sensor coils18Version level (xx.xx.xx)19Label indicating whether the unit is subject to thePressure Equipment Directive (PED).Information on the relevant fluid group.Fluid group 1 = hazardous fluids, liquid, gaseous.(Pressure Equipment Directive = PED).If the pressure equipment is not subject to thePressure Equipment Directive 97/23/EC, it isclassified in accordance with SEP (= soundengineering practice) as per Art. 3 Para. 3 of the PED.If no such information is present, it means that thedevice does not claim to comply with the requirementsof the Pressure Equipment Directive 97/23/EC. Watersupplies and connected equipment accessories areclassed as an exception in accordance with guideline1/16 of Art. 1 Para. 3.2 of the Pressure EquipmentDirective.Important (Notice)Meters with 3A approval are labeled with an additional plate.
