ABB FEX300 Operating Instruction

Also see for FEX300: Original instruction Commissioning Instruction

Contents

ABB FEX300 Operating Instruction Manual pdf 74 page image

Parameterization74 FEX300, FEX500 OI/FEX300/FEX500-EN7.2.1 Process displayG00756123 4 3Fig. 59: Process display (example)1 Measuring point identifier2 Current process values3 Symbol indicating button function4 Symbol indicating "Parameterizationprotected"The process display appears on the LC display when the device is switched on. It showsinformation about the device and current process values.The way in which the current process values (2) are shown can be adjusted on the configurationlevel.7.2.1.1 Description of symbolsSymbol DescriptionCall up information level.When Autoscroll mode is enabled, a  symbol appears here and the operatorpages are automatically displayed one after the other.Call up configuration level.The device is protected against changes to the parameter settings.Q Display of the current flowrateΣ+ Totalizer status in forward directionΣ- Totalizer status in reverse direction