2PAA118721 | Quick Installation Guide LD 810HSE Ex 33Section 5 Manufacturer‘s DeclarationThis device complies with the requirements of the EC directive 2014/30/EU,“Electromagnetic Compatibility” (EMC directive). It meets the following harmo-nized standards:– EN 55011 - Industrial, scientific and medical (ISM) devices - radiodisturbance - limits and methods of measurement– EN 55032 - Electromagnetic compatibility of multimedia equipment (MME)and interference emission– EN 61000-6-4 - Electromagnetic compatibility (EMC); part 6-4: genericstandard – Emission standard for industrial environments– EN 61000-6-2 - Electromagnetic compatibility (EMC); part 6-2: genericstandard - Immunity for industrial environmentsTo fulfill the EMC requirements, the other components of yourinstallation (DC adapter, Industrial Ethernet devices, etc.) also haveto meet the EMC requirements. A shielded cable must be used. Inaddition, the cable shield must be grounded properly.RoHSThe LD 810HSE Ex device is RoHS compliant.WEEEElectrical and electronic equipment must be disposed of separatelyfrom normal waste at the end of its operational lifetime. Packagingmaterial and worn components shall be disposed of according tothe regulations applicable in the country of installation.