value is not stored in non-volatile memory and thus the rebootrestores the original value.GUID-834A71AE-B6C1-4EAD-840F-929B3AF18A85 V3 ENFigure 32: Committing changesCommitting values will take a few seconds.If you only write values to the IED and then reboot, the old valueswill resume in the IED as active values and the new values are lost.4.2.8 Clearing and acknowledgingReset, acknowledge or clear all messages and indications, including LEDs and latchedoutputs as well as registers and recordings, in the Clear menu.1. Click the Clear menu.Section 4 1MRS756499 AUsing HMI locally or via web interface50 RED615Operation Manual
