21. Ordering for AccessoriesAccessories IP15151-1 v1Interface converter (for remote end data communication) M16668-3 v9External interface converter from C37.94 to G703 Quantity: 1MRK 002 245-AAExternal interface converter from C37.94 to G703.E1 Quantity: 1MRK 002 245-BATest switch SEMOD111888-5 v12The test system COMBITEST intended for use with the IEDsis described in 1MRK 512 001-BEN and 1MRK 001024-CA.Please refer to the website: www.abb.com/protection-controlfor detailed information.Test switches type RTXP 24 is ordered separately. Pleaserefer to Section Related documents for references tocorresponding documents.RHGS 6 Case or RHGS 12 Case with mounted RTXP 24 andthe on/off switch for dc-supply are ordered separately. Pleaserefer to Section Related documents for references tocorresponding documents.Protection cover M15040-3 v6Protective cover for rear side of RHGS6, 6U, 1/4 x 19” Quantity: 1MRK 002 420-AEProtective cover for rear side of terminal, 6U, 1/2 x 19” Quantity: 1MRK 002 420-TACombiflex IP15161-1 v1Key switch for settings SEMOD130356-4 v6Key switch for lock-out of settings via LHMI Quantity: 1MRK 000 611-ANote: To connect the key switch, leads with 10 A Combiflex socket on one end must be used.SEMOD130267-5 v6Mounting kit Ordering numberSide-by-side mounting kit Quantity: 1MRK 002 420-ZConfiguration and monitoring tools IP15162-1 v2M15042-3 v4Front connection cable between LHMI and PC Quantity: 1MRK 001 665-CASEMOD131414-4 v3LED Label special paper A4, 1 pc Quantity: 1MRK 002 038-CALED Label special paper Letter, 1 pc Quantity: 1MRK 002 038-DAManuals M15161-3 v13Note: One (1) IED Connect USB flash drive containing user documentation (Operation manual, Technicalmanual, Installation manual, Commissioning manual, Application manual and Getting started guide),Connectivity packages and LED label template is always included for each IED.1MRK 506 384-BEN ALine distance protection REL650 2.2Product version: 2.2.186 ABB