When editing an enumerated value, the selected value is shown inverted.2. Press or to change the value of an active enumerated value.One press changes the enumerated value by one step in the parameter specificorder.4.1.12.4 Changing the time settings in LHMI1. Select Main menu/Configuration/Time/System time.The change takes effect immediately.2. Press to confirm the selection.• Press to remove the changes.4.1.13 Saving settingsEditable values are stored in the non-volatile flash memory. Most of the parameterchanges take effect immediately after storing, but some parameter changes requireapplication restart. Values stored in the flash memory remain in effect after reboot aswell.1. Press to confirm any changes.2. Press to move upwards in the menu tree or to enter the Main Menu.3. To save the changes in non-volatile memory, select Yes and press .A071206 V2 ENFigure 27: Confirming settings• To exit without saving changes, select No and press .• To cancel saving settings, select Cancel and press .Pressing Cancel in the Save changes dialog closes only the Savechanges dialog box, but the IED remains in editing mode. All thechanges applied to any setting are not lost and the user can continue tochange settings. To leave the change setting mode, select No or Yesin the Save changes dialog.1MRS756509 E Section 4Using the HMI630 series 45Operation Manual
