Operation Manual / TPL65-A32 / -A33 / -A36 + TPL69-A32 / -A33Safety 2Lifting loads 2.9 Page 28© Copyright 2016 ABB. All rights reserved.November 2016HZTL2498_ENRevision BLifting loads2.9WARNINGSuspended loadsLoads not suspended in compliance with regulations may lead to per-sonal injury or accidents with fatal consequences. Loads must always be fastened to technically perfect lifting gear withsufficient loading capacity. Make sure the load is suspended properly on the crane hook. Do not let anyone stand beneath a suspended load.Wear safety gloves against mechanical risks.Wear safety helmet.In the case of two or more suspension points, the slinging angle must notexceed 45°. This avoids excessive loading due to inclined tensile loading. Fasten turbocharger assemblies / components as described in respec-tive handling steps. Before attaching slings, allow turbocharger components to cool down(maximum 80°C). Use suitable protection at sharp edges. Completely screw in assembly / fitting devices without fail so that theycannot work loose during use. Use assembly / fitting devices only for applications described. Make sure removed turbocharger components stand safely and se-curely.2.9
