Operation Manual / TPL65-A32 / -A33 / -A36 + TPL69-A32 / -A33Disassembly and assembly 8Introduction 8.1 Page 85© Copyright 2016 ABB. All rights reserved.November 2016HZTL2498_ENRevision BDisassembly and assemblyIntroduction8.1CAUTIONFurther workFurther tasks, which are not described here, may be carried out only bytrained personnel from an ABB Turbocharging service station. Only carry out those tasks that are described in this chapter.NOTICEMarking casing positions for assemblyABB Turbo Systems recommends that the casing positions are markedbefore disassembling the turbocharger.Identifying assembly devicesNot all assembly devices are marked with a part number. They can beidentified using the tool list. This list is enclosed in the toolbox.WARNINGMaintaining assembly devicesAssembly devices must be checked for damage before and after use. Visually check for corrosion, cracks, deformation and wear. Don't use damaged assembly devices, but replace them.Customer spare parts setBefore beginning work, ensure that the required customer spare partssets are available. See chapter Spare parts.88.1
