ABB Triguard SC300E Safety Manual

Also see for Triguard SC300E: User manual

Contents

ABB Triguard SC300E Safety Manual Manual pdf 56 page image

Issue 5 - September 2006 Page 56 of 6511.2 MHB44IND 4 channels pulse input and 4 channel analogue output module.The Piano module may only be used with TriBuild for Windows version 1.42 and RTTS 8.3-006or above with the following restrictions.1. The registers used for the analogue outputs must be initialised to 256 or greater to preventthe module losing health.2. The ladders for the analogue outputs must be configured to prevent the output registersgoing below 256 resulting in the module losing health.11.3 MAO04IND 4 channel analogue output module.The following conditions must be applied when using the analogue output module1. The registers used for the analogue outputs must be initialised to 256 or greater to preventthe module losing health.2. The ladders for the analogue outputs must be configured to prevent the output registersgoing below 256 resulting in the module losing health.11.4 System identificationBoth RTTS 8.30 versions are identified by the title in the history report and by thecheck sums of the EPROM’s as follows:11.4.1 SC300E RTTS 8.30-005Version 8.30 LOC SC-300E ROM System-005 Generated 19-May-2000 11:07U86 - 486EhU106 - 0BC0hU87 - 46AChU107 - 3E43h11.4.2 SC300E RTTS 8.30-006Version 8.30 LOC SC-300E ROM System-006 Generated 12-Jul-2000 15:38U86 - 4885hU106 - 0BCFhU87 - 469FhU107 - 3D53h