ABB eCharger Series Manual

ABB eCharger Series Manual Manual pdf 25 page image

2CCF018900R0002-CH | AC Charger for Electric Vehicles, Model eCharger 251.7 Type labelThe type label is located on the outer right side of thecharging station, see fig. 19.Fig. 1: Type label1 Manufacturer2 Type designation3 EAN Code4 Serial number5 Nominal voltage, nominal current, nominal frequency6 Degree of protection7 Date of manufacturing1.8 Type designationFig. 2: Type description matrix1.9 Safety notes for transportPlease note:- Do not expose the charging station to humidityduring transport. Choose adequate packaging.- Choose packaging so that the charging station isprotected against shock, e.g. through air-cushionedpackaging.Before installation it is advised to check for damages causedby improper transport. Damages resulting from transportshould be noted on the transport documents. Anycompensation against the forwarder must be claimedimmediately and before installation.1.10 Conditions for Storage- The charging station should be stored in a dry anddustless manner. It should only be stored/movedusing the original or equally adequate packaging.- The acceptable conditions for transport andstorage can be read in chapter “Technical Data”.- In general, the possible time of storage isunlimited; however the warranty conditions stated inthe order confirmation of the supplier apply.1.11 Safety notes for electrical installationThe electrical installation must be made by authorizedpersonal according to this manual. Instructions for electricalinstallation should be observed otherwise the electricalprotection could be compromised.1.12 Safety notes for operationBefore commissioning make sure that all requirements listedin chapter “Technical Data” and in the data sheet are met. Ifa safe operation cannot be guaranteed, stop the operation ofthe charging station and ensure that it cannot be usedunintentionally.1.13 Returning the charging stationFor returning of the charging station for repair, use theoriginal or equally adequate packaging. Please attach thecompleted return form (see annex).Contact ServicePlease contact your local ABB sales unit.For technical questions please refer to:emobility@ch.abb.com1.14 Integrated management systemABB Switzerland Ltd. Low Voltage Products has anintegrated management system, consisting of:— Quality-Management-System ISO 9001:2008,— Environmental-Management-System ISO 14001:2004,— Management-System for occupational and healthprotection BS OHSAS 18001:2007— Data- and information protection systemThe environmental aspect is an important part of ourcorporate policy. Pollution of the environment and peopleshould be kept at a minimum during production, storage,transport usage and disposal of our products and solutions.This especially refers to the careful use of natural resources.Through our publications, we are in a permanent dialoguewith the public.1.15 DisposalThe product is made of material that can be recycled byspecialized recycling companies.Typ: CUA2-U1T2L-16M3EAN:SN:1 x 230 VAC 16A 50/60 HzIP 44 Date of manufacturingMade in Switzerland1234567