ABB i-bus KNX 6108/06-500 Technical Reference Manual

Contents

ABB i-bus KNX 6108/06-500 Technical Reference Manual Manual pdf 80 page image

Description of application and parametersApplication "LED function"KNX Technical Reference Manual 1473-1-8905 / 2CKA001473B8905 │8010.19.16 Extended parameters - Alarm functionOptions: DeactivatedActivatedThe LED will flash if an ON telegram is received on the 1-bit communication object "Alarm". Ifthe object receives an OFF telegram, the LED will no longer flash.The LED always flashes in the same colour and brightness that was specified via the statusfunction or function display.The alarm function could be used to display a wind alarm to the user, for example, so that theuser knows that no blind operation is possible at that time. An additional application would bethe signalling of an open door when user would like to lower a roller blind.NOTEIf the LED is currently serving as an orientation light, it will not blink. This alsoapplies if during the flashing it is switched to orientation lighting, i.e. the LEDstops flashing immediately.