Description of application and parametersApplication "Function block RTC"Product manual 2CKA001473B9482 │11911.5.118 Fan coil settings - Fan speed levelsNoteThis parameter is only available if the "Device function" parameter is set oneither "Single device" or "Master device" and the "Control value type" parameteris set on "Fan coil".11.5.119 Fan coil settings - Fan speed levels — Number of fan speed levelsOptions: 3 levels5 levelsThis parameter is used to specify the number of fan speed levels the actuator will use to controlthe fan of the fan coil.11.5.120 Fan coil settings - Fan speed levels — Format of the level outputOptions: 0..50..2551 bit m off n1 bit m 1 off n– 0 to 5: The level values (0..3 or 0..5) are output in the 1-byte format as the counter values0..3 or 0..5.– 0 to 255: The level values (0..3 or 0..5) are output as percentage values. Example 5-stagefan: The level value 1 is output as 20%, and 5 is output as 100%.– 1 Bit m from n: The level values (0..3 or 0..5) are output using 1-bit objects. The number ofobjects available is the same as the number of fan speed levels. For level 2, for example,the 1-bit fan speed level objects 1 and 2 are output as the value 1, while the other fan speedlevel objects use the value 0.– 1 Bit 1 from n: The level values (0..3 or 0..5) are output using 1-bit objects. The number ofobjects available is the same as the number of fan speed levels. For the level 2, forexample, only the 1-bit fan speed level object 2 is output as the value 1. The other fanspeed level objects use the value 0.