ABB i-bus KNX Product Manual

Also see for i-bus KNX: Product manual Product manual Product manual Product manual Product manual

Contents

ABB i-bus KNX Product Manual Manual pdf 131 page image

Description of application and parametersApplication "Function block RTC"Product manual 2CKA001473B9482 │13111.5.138.7 Colour for Zone 2 (starting at 1%)Options: OffYellowRed-orangeRedVioletBlueGreenWhite■ Off:– The button LEDs are switched off.■ Yellow - white:– The button LEDs light up in the fixed colour at value telegrams for zone 2.The parameter is used to specify the colour the button LEDs light up in when a telegram with avalue is received via the 1-byte communication object "Status LED", which meets the followingconditions:■ Value is ≥ 1% and■ Value is < S1.The default setting is "yellow".The threshold value S1 is set via the parameter "Threshold between Zone 2 and 3" (%).NoteThe parameter can only be set if the "Operating mode" parameter and is set on"Status illumination" and the "Object type for status object" parameter is set on"1 byte 0-100%".11.5.138.8 Threshold between Zone 2 and 3 (%)Options: Setting option from 1 to 98The parameter is used to set the threshold value (S1) between Zone 2 and 3.If the value received is < S1 and ≥ 1%, the button LEDs light up in the colour for zone 2.If the value received is ≥ S1 and < S2, the button LEDs light up in the colour for zone 3.NoteThe parameter can only be set if the "Operating mode" parameter and is set on"Status illumination" and the "Object type for status object" parameter is set on"1 byte 0-100%".