13REPLACING THE BATTERYREPLACING THE BATTERYFig.8Fig.9Fig.10Battery: CR2032 (3-Volts)1. Make sure the register is plugged in, the powerswitch is at “ON” position and turn the ControlLock key is turned to the “OFF position.2. Open the printer cover.3. Open the battery cover in the rear left section ofthe component (See Fig. 8).4. Remove the old battery by pushing the small clawon the rear end of the battery (See Fig.9).5. Put the new battery in the same position(See Fig. 10)6. Close the battery cover and the printer cover.
