90X/Z MANAGEMENT REPORTS (Continued)TO TAKE A CASH-IN-DRAWER/CHECK-IN-DRAWER REPORT"X" + [CHECK/STUBS]1. Turn the key to the "X" position.2. If a Manager Password has been programmed, ENTER the (PASSWORD #), then PRESS the[CLERK] key now, or if you did NOT program a Manager Password, go to Step 3.3. PRESS the [CHECK/STUBS] key.TO TAKE AN HOURLY REPORT"X" or "Z" + [PLU/DEPT ALT] + [QTY/TIME]1. Turn the key to the "X" or "Z" positions as desired.2. If a Manager Password has been programmed, ENTER the (PASSWORD #), then PRESS the[CLERK] key, or if you did NOT program an "X" or a Manager Password, go to Step 3.3. PRESS [PLU/DEPT ALT], then PRESS the [QTY/TIME] key.Important: An hourly reading must be closed out (reset) in the "Z" position.* X 1 *IN DRAWER REPORTCAID 58N119.53CKID 1N1.0610-24-2002 PM 04:520054CLERK01SHOWS $119.53 CASH-IN-DRAW TOTALSHOWS $1.06 CASH-IN-DRAW TOTALTRANSACTION NUMBERINDICATES CASH-IN-DRAWERCHECK-IN-DRAWER TOTALREPORT WAS TAKENCLERK NUMBER* X 1 *HOURLY REPORT15:00 14N55.6216:00 44N36.93SALES TOTAL (including tax) at 15:00 pmSALES TOTAL (including tax) at 16:00 pm
