ACN DigitalTalk Express Installation Manual
Also see for DigitalTalk Express: Quick installation guideInstallation guideInstallation guide
  |
Phone Adapter Installation Guide1. An active wired Internet connection with a minimum download andupload speed of 128 Kbps per voice line2. Your existing telephone equipment3. Access to an open port on your network with a wired Ethernet cableACN Phone Adapter AC Adapter Ethernet CableSTEP 1 Connecting The Phone Adapter to Your InternetPrior to the installation of your phone adapter, please ensure you have established a staticpublic IP address (from your Internet Service Provider) and given the IP address to ACN.Contact ACN at 877-876-8767 for assistance with configuring your static public IP addressinto your phone adapter.1. Place the phone adapter where your service provider phone lines connect to yourphone wiring. This is typically in a wiring closet or panel.2. Connect one end of the Ethernet cable to an appropriate port on your network withthe other end connected to the port on the phone adapter labeled WAN.3. Connect the AC adapter to the back of the phone adapter in the port labeled DC 12V.Plug the other end into an outlet.4. Wait 7 minutes for the phone adapter to initially register with ACN’s network.5. Verify that the phone adapter is properly connected by noting the LED status lights.Confirm the following lights are on: (Front of Device)• Power• Ready• WANIf for any reason the lights indicated above are not on, reference the LED Status Indicator Table inthis guide.Congratulations on the purchase of your new ACN DigitalTalk® Express Phone Adapter!This product is intended to be installed by a qualified professional, either provided by ACN or a local telecom technician of your choice.**Professional installation costs are applicable and the responsibility of the end user.Review Items Included in Your Phone Adapter Kit Items You NeedLED Status Indicator TableDevice LED LED Status Reason for LED StatusPower ON Device has powerOFF Device does not have powerReady ON Ready for useBlinking Not ready for useWANON/Blinking Established Ethernet Cable/ConnectionOFF Failure in Ethernet Cable/ConnectionLines 1-8 ON Line in useOFF Line not in useNote: Console and LAN not usedItems You Need |
Related manuals for ACN DigitalTalk Express
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine