ACN DigitalTalk Express Installation Manual
Also see for DigitalTalk Express: Quick installation guideInstallation guideInstallation guide
  |
Phone Adapter Installation Guide1. An active wired internet connection with a minimum download andupload speed of 128 Kbps per voice line2. Your existing telephone equipment3. Access to an open port on your router with wired Ethernet cableACN Phone Adapter AC Adapter Ethernet CableSTEP 1 Connecting The Phone Adapter to Your Internet1. Place the phone adapter where your service provider phone lines connect toyour phone wiring. This is typically in a wiring closet or panel.2. Connect one end of the Ethernet cable to an available port on your router withthe other end connected to the port on the phone adapter labeled LAN.3. Connect the AC adapter to the back of the phone adapter in the port labeledDC 12V. Plug the other end into an outlet.4. Wait 7 minutes for the phone adapter to initially register with ACN’s network.5. Verify that the phone adapter is properly connected by noting the LED statuslights.Confirm the following lights are on:• Power• LAN (back of phone adapter)• Phone (one light per line)If for any reason the lights indicated above are not on, reference the LED StatusIndicator Table in this guide.Congratulations on the purchase of your new ACN DigitalTalk® Express Phone Adapter!It is important to read all instructions in their entirety. If you are unfamiliar with your currenttelephone equipment setup, please consult a local qualified telecom technician.Review Items Included in Your Phone Adapter Kit Items You NeedLED Status Indicator TableDevice LED LED Status Reason for LED StatusPower ON Device has powerOFF Device does not have powerEthernet/RJ45 (back ofadapter)ON Establish Ethernet Cable/ConnectionOFF Failure in Ethernet Cable/ConnectionPhoneON Ready to make/ recieve callsOFF Line not ready/availableBlinking New Voice Mail message |
Related manuals for ACN DigitalTalk Express
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine