ACP HDC Series Owner's Manual

ACP HDC Series Owner's Manual Manual pdf 8 page image

©2019 ACP, Inc.Cedar Rapids, IA 52404Page 8 of 22Part No. 20267401Original InstructionsSTYLE 1 OperationInterrupting OperationOpen oven door or press STOP/RESET keypad to interrupt operation.Display continues to show countdown time. Close door and press START/OK keypad to resume oven operation.Canceling MistakesIf oven is not cooking, press STOP/RESET keypad to clear display.If oven is cooking, press STOP/RESET keypad once to stop oven, then again toclear display.If oven door is open and time shows in display, close oven door and press STOP/RESET keypad to clear display.Operating Preset Program KeypadsFrom the factory, this oven comes preprogrammed with several cooking sequences inmemory. To heat using a preset program, press number keypad(s). Oven will start to heatautomatically.1. Open oven door, place food in oven, and close oven door.• READY screen is displayed• If keypad is not pressed within 60 seconds, open and close oven door again.2. Press desired number keypad(s)• Single Digit Keypad Cooking: press a single keypad (0-9)• Double Digit Keypad Cooking: press the two keypads, in order, of the double digitnumber for the desired cooking sequence (00-99)• Folders: press one keypad to open folder (0-9), followed by keypad for desiredcooking sequence (0-9)Note: To change Digit Entry option see User Options section in this manual3. Oven operates and time counts down.• Display shows the program name and counts down cooking time.• If additional cooking time is required, press preset keypads before or after cookingcycle ends.4. At the end of the cooking cycle, the oven beeps. Carefully remove food from oven.X2 - DOUBLE QUANTITY COOKING (optional)Press and hold number keypad “5”/ X2 to toggle double quantity feature ON.• “X2” appears at top center of screen when enabled.Press desired number keypad(s).• Display shows the program name and counts down cooking time for twoquantities.MENU A/B (select models)Press and hold number keypad “6” to toggle between A and B menus.Quantity Prompt (select models)1. Press desired number keypad(s)• ENTER QUANTITY screen is displayed2. Enter desired quantity using keypad 1-9• Display shows the program name and counts down cooking time.Quantity is displayed in top left corner.FACTORY PRESET PROGRAMSMenu AKEYPAD TIME POWER1 10 sec.100%2 20 sec.3 30 sec.4 45 sec.5 1:00 min.6 1:30 min.7 2:00 min.8 3:00 min.9 4:00 min.0 5:00 min.Factory setting may vary by model41321