ACR Electronics AIS Link MOB User Manual

Contents

MOB USER MANUAL3 Y1-03-0283 Rev. CIN CASE OF EMERGENCYUse only in situations of graveor imminent danger.The MOB is intended to be fitted to a life jacket. If the MOB iscorrectly fitted to the life jacket, then it will automatically activatewhen the life jacket inflates. This guide shows how to manuallyactivate the MOB. Press either of the grey Arming Retainers down (1) Slide the grey Activation Slide (2) sideways towards thedepressed Arming Retainer and remove. This will release theantenna and activate the MOB. If the strobe light does not start flashing, manually switch theMOB on by pressing the “ON” Key (3)Always turn the MOB off immediately after you have been rescuedto avoid interference with other users. To deactivate, press the“TEST/OFF” button until the LED flashes red twice, then release.211Warning: Do not placeeyes near Activation Slide.3