www.acti.comInstallation Guide16Step 6: Install the Camera1. Align the camera screw holes to the screw holes on the gang box converter marked #2 asyou push the excess length of cable into the gang box.2. Attach the three (3) screws with rubber, which are bundled with the gang box converter, tosecure the camera to the converter.CAUTION: When using electric screwdrivers, be careful not to touch the internalcamera components while attaching the screws. Since electric screwdrivers vary in sizes,speed, and force, they may bruise and damage the internal camera components.DISCLAIMER: ACTi will not be responsible for camera damage caused by improperinstallations or the misuse of equipment for installation.