ACTi KCM-7911 Installation Manual
Also see for KCM-7911: Hardware user manualHardware manualInstallation guide
                                  | |
Contents
|
www.acti.comInstallation Guide52. From this point: When doing the Waterproof Solution with Naked Cable, skip this step. When doing the Waterproof Solution with Conduit, pull the network cable throughthe flex conduit. If connecting other input/output devices or an external poweradapter, pull the cables through the flex conduit without connectors. The terminalblocks will be attached once the cables pass through the camera hole later.Step 2: Prepare the Camera for InstallationNOTE: To avoid scratches or leaving fingerprints on the dome cover, it is recommended to retainthe plastic covering the dome cover until the camera is completely installed. However, the plastichas been removed on some of the pictures in this documentation to show clarity of theprocedures being described.1. Remove the metal cap covering the bottom hole of the camera, and attach the cap to the sidehole to close it. The cable will be routed to pass this hole from the gang box later. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine