ACTi KCM-7911 Installation Manual
Also see for KCM-7911: Hardware user manualHardware manualInstallation guide
                           | |
Contents
|
www.acti.comInstallation Guide20AppendicesThis section describes the procedures in preparing the external devices that you can connect tothe camera. The camera supports DC12V power input, Digital Input and Output (DI/DO) andAudio Input and Output devices using the bundled terminal blocks. The use of these devices,however, is optional.Connecting a Power Adaptor (Optional)The camera consumes 9.6W power when powered by a Power over Ethernet (PoE) switch that isIEEE802.3af compliant. In case of using a non-PoE switch or your PoE switch has limited powersupply, you can purchase a power adaptor and directly connect the camera to a power outlet. Thepower adaptor must be connected to the supplied terminal block before use.To do this, follow the procedures below:1. Loosen the screws of the 12V and GND pins of the power terminal block.2. Take note that a standard power adaptor cable has two (2) different wires:White stripe: Connects to 12V PinConnects to GND Pin |
Related manuals for ACTi KCM-7911
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine