ACTi KCM-7911 Installation Manual
Also see for KCM-7911: Hardware user manualHardware manualInstallation guide
                           | |
Contents
|
www.acti.comInstallation Guide3Mounting SolutionsThe camera can be mounted on a vertical pole with the camera facing forward using the PoleMount with Surface Mount (SMAX-0136). With this accessory combination, the camera facesforward with a 10 tilt.The camera comes with two (2) glands used for waterproof installation: Cable gland and ConduitGland.Cable Gland Conduit GlandFor use with an EXTERIOR-GRADEEthernet cable. Exterior-grade Ethernetcables are already waterproof.For use with 3/8” flexible conduit.Recommended when an exterior-gradeEthernet cable is not available or when otherinput/output devices or an external poweradaptor will be connected to the camera.Determine the type of waterproof solution that is applicable to your installation requirements andprepare the necessary accessories or purchase extra materials. Installation using Naked Cable: This installation uses the supplied cable gland and anexterior-grade Ethernet cable (not supplied). Installation Using Flexible Conduit: This installation uses the supplied conduit glandand a 3/8” flexible conduit (not supplied). This is the recommended solution if otherinput / output devices or an external power adaptor will be connected to the camera.and |
Related manuals for ACTi KCM-7911
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine