ADJ COB CANNON WASH DW User Manual

11O P E R A T I N G I N S T R U C T I O N SDimmer Curve:This is used to set the dimming curve used with DMX mode. See the Dimmer Curve Chart section ofthis manual for detailed information.1. Plug the fixture in and press the MODE button until “d.XXX” is displayed. “XXX” represents thecurrently selected DMX address.2. Press the SET UP button until “dr-X” is displayed. “X” represents the displayed dimmer curve,each of which is represented by a number (0-4).• 0 - Standard• 1 - Stage• 2 - TV• 3 - Architectural• 4 - Theatre3. Press the UP or DOWN buttons to scroll through and select your desired dimming curve.Secondary Mode:1. Press the MODE button until “Secd” is displayed.2. The unit is now set to secondary mode, and will follow the functions of the designated primary unit.Dimmer Mode:1. Press the MODE button until either h.xxx or C.xxx is displayed. The last option that was selectedwill be displayed.2. Press SETUP to toggle between that warm white dimmer (h.xxx) and the cool white dimmer(C.xxx), then use the UP and DOWN buttons to set the desired value for each.3. Press SETUP until “FS.XX” is displayed, indicating that the unit is in Flash mode. The Flash canbe adjusted from “FS.00” (flash off) to “FS.15” (fastest flash).Sound Mode:1. Press the MODE button until So.xx is displayed.2. Press SETUP select So.xx, then use the UP and DOWN buttons to select the desired soundmode.3. Press SETUP until “SJ-x” is displayed, then use the UP and DOWN buttons to set the sound sen-sitivity level. SJ-1 is the least sensitive, and SJ-8 is the most sensitive.Auto Run Mode:1. Press the MODE button until either AF.xx, AJ.xx, or A-JF is displayed. The currently selected op-tion will be displayed.2. Press SETUP to toggle between the three auto run settings:• AF.xx = dreaming mode.• AJ.xx = jumping mode.• A-JF = dreaming and jumping mode.3. When the desired auto run setting is displayed, use the UP and DOWN button to select which ver-sion of the auto run program to use. Dreaming mode (AF.xx) and jumping mode (AJ.xx) each have8 options to choose from, while A-JF has no additional options.4. Press SETUP until “SP.XX” is displayed, then use the UP and DOWN buttons to set auto runspeed.