ADJ COB CANNON WASH DW User Manual

12O P E R A T I N G I N S T R U C T I O N SStatic Color Mode:1. Plug the fixture in and press the MODE button until “CL.XX” is displayed.2. There are 8 colors to choose from. Select your desired color by pressing the UP and DOWN but-tons, then activate strobing by pressing the SET UP button to enter the Flash (strobe) mode.3. “FS.XX” will be displayed, indicating that the unit is in Flash mode. The Flash can be adjustedfrom “FS.00” (flash off) to “FS.15” (fastest flash).Display Setting:This function controls whether the display screen remains permanently on.1. Plug the fixture in and press the MODE button until either “dxx”, “rFxx”, “Stnd”, “rEv”, or dEFA” isdisplayed.2. Press the SET UP button to scroll to “dxx” if it is not already selected.3. Press the UP or DOWN buttons to toggle between “don” (display always on” and “doFF” (displayoff).Remote Function:This function is used to activate and deactivate the receiver for the ADJ RFC (Remote Control). Whenthis function is activated, you can control the fixture using the ADJ RFC. Please see the ADJ RFCOperation section of this manual for information about controls and functions.1. Plug the fixture in and press the MODE button until either “dxx”, “rFxx”, “Stnd”, “rEv”, or dEFA” isdisplayed.2. Press the SET UP button until “rFXX” is displayed. “XX” represents either “on” or “oF”.3. Press the UP or DOWN buttons to either activate the remote function (rFon) or deactivate it(rFoF).Display Orientation:This function controls the orientation of the display readout.1. Plug the fixture in and press the MODE button until either “dxx”, “rFxx”, “Stnd”, “rEv”, or dEFA” isdisplayed.2. Press the SET UP button to scroll to “Stnd / rEv” if it is not already selected.3. Press the UP or DOWN buttons to toggle between “Stnd” (normal display orientation) and “rEv”(inverted display orientation).Default Running Mode:This is a default running mode. When this mode is activated, all modes will return to their default set-tings.1. Plug the fixture in and press the MODE button until “dXX” is displayed. “XX” represents either “on”or “oFF”.2. Press the SET UP button until “dEFA” is displayed.3. Press the UP and DOWN buttons simultaneously. Press the MODE button to exit.