ADJ Products, LLC - www.adj.com - Hydro Beam X1 User Manual Page 26Hydro Beam X1 System MenuSYSTEM MENUThe fixture includes an easy to navigate system menu control panel display where all necessarysettings and adjustments are made. (See image below) During normal operation, pressing the MENUbutton once will access the fixture’s main menu. Once in the main menu, you can navigate throughthe different functions and access the sub-menus with the UP and DOWN buttons. When you reacha field that requires adjusting, press the ENTER button to access that field and use the UP andDOWN buttons to adjust the field. Pressing the ENTER button once more will confirm your setting.You may exit the main menu at any time without making any adjustments by pressing the MENUbutton.SYSTEM LOCK/UNLOCK: When the display lock function is activated, the display and systemmenu will lock after 10 seconds of no activity. To UNLOCK the display, press and HOLD the MENUbutton for 10+ seconds.While pressing the MENU button, a timer will appear at the bottom of the display indicating the pass-ing seconds from 0-9. Once the timer reaches 9 seconds, the display will unlock allowing access tothe system menu.DO NOT RELEASE THE MENU BUTTON UNTIL THE DISPLAY IS UNLOCKED.If the MENU button is released before the timer reaches 9 seconds and/or is unlocked, the displaywill not unlock and the time will be reset.NOTE: The timer will not appear in the display if the lock function is disabled.