ADJ IKON PROFILE WW User Manual

Also see for ikon profile ww: User instructions

ADJ Products, LLC - www.adj.com - Ikon Profile WW User Manual Page 10Ikon Profile WW Gobo ReplacementThe Ikon Profile WW gobo can be interchanged at any time, allowing you to customize your system.To replace gobo:1. Gently slide the gobo housing out of the top of unit. The gobo housing is located in front of thetop flag.2. Once the gobo housing has been removed, remove the retaining ring that holds the gobo in. Thiscan easily be done using needle nose pliers.3. Remove and replace the gobo with your desired replacement. Reinsert the retainer ring, andmake sure the ring rests firmly against the gobo.4. Slide the gobo assembly back into place.Ikon Profile WW Adding a Color GelA color gel (not included) can be added to the front of the Ikon Profile WW and can be interchangedat any time. This allows you to customize your system.To add a color gel:1. Locate the color gel frame at the front of the unit. Slide the spring lever back and slide the gelframe out of the holder.2. Once the gel frame has been removed slide your desired color gel into the middle of the frame.3. Slide the spring back and slide the gel frame into place.