ADJ IKON PROFILE WW User Manual

Also see for ikon profile ww: User instructions

ADJ Products, LLC - www.adj.com - Ikon Profile WW User Manual Page 8Ikon Profile WW System MenuDIND - This will let select your desired dimmer curve.1. Press the MENU button until “DIND” is displayed, and press ENTER. 1 of 5 dimmer curves will bedisplayed. “STDA” (standard), “STGE” (stage), “TV” (TV), “ARAL” (Architectural), or “THAL” (The-atre).2. Press the UP or DOWN buttons to find your desired dimmer curve and press ENTER to confimand exit.LED - With this function the LED display will turn off after 2 minutes.1. Press the MENU button until “LED” is displayed, and press ENTER.2. The display will show either “ON” or “OFF”. Press the UP or DOWN buttons to select “ON” tokeep the LED display on at all times, or “OFF” to allow the LED display to turn off after 2 minutes.Press any button to turn on the LED display again.3. Press ENTER to confirm and exit.DISP - This function will reverse the display 180º.1. Press the MENU button until “DISP” is displayed, and press ENTER.2. Press the UP button to select “DISP” to activate this function, or “DSIP” to deactivate this func-tion.3. Press ENTER to confirm.MANU - In this submenu you are able to test the dimmer and strobe.1. Press the MENU button until “MANU” is displayed, and press ENTER.2. Use the UP and DOWN buttons to scroll through the various functions able for testing. Once youhave found your desired function, press ENTER.3. After you have pressed ENTER, use the UP and DOWN buttons to adjust the values and test thefunction. To exit press the MENU button.TEST - This function will run a self test program.1. Press the MENU button until “TEST” is displayed, and press ENTER.2. The fixture will now run a self test.TEMP - With this function you can check the temperature of the fixture.1. Press the MENU button until “TEMP” is displayed, and press ENTER.2. The fixture temperature will now be displayed. Press MENU to exit.FHRS - With this function you can display the running time of the unit.1. Press the MENU button until “FHRS” is displayed, and press ENTER.2. The display shows the running time of the unit. Press MENU to exit.VER - Use this function to display the Software version of the unit.1. Press the MENU button until “VER” is displayed, and press ENTER.2. The display will show the software version.