ADJ INNO POCKET ROLL User Instructions

Also see for INNO POCKET ROLL: User manual User instructions

ADJ Products, LLC - www.adj.com - Inno Pocket Roll Instruction Manual Page 10 ADJ Products, LLC - www.adj.com - Inno Pocket Roll Instruction Manual Page 11BLND - Blackout or Stand by mode.1. Press the MENU button until “BLND” is displayed, pressENTER. Either Yes or No will be displayed.2. To activate Blackout tap the UP or DOWN buttons until “Yes”is displayed, press ENTER to confim. The fixture will now be inBlackout mode. To deactivate Blackout mode, select “No” andpress Enter.LED - With this function you can have the LED displayturn off after 10 seconds.1. Press the MENU button until “LED” is displayed, pressENTER.2. The display will show either “ON” or “OFF”. Press the UP orDOWN buttons to select “ON” to keep the LED display on atall times, or “OFF” to switch to have the LED display switch offafter 10 seconds.3. Press ENTER to confirm. To make the LED display reappearafter it has turned off, press any button.DISP - This function will reverse the display 180º.1. Press the either the MENU button until “DISP” is displayed,press ENTER.2. Press the UP button to select “DSIP” to “flip” the display, or“DISP” to change the display back.3. Press ENTER to confirm.PAN - Pan Inversion1. Press the MENU button until “PAN” is displayed, pressENTER. Either Yes or No will be displayed.2. To activate the Pan inversion press the UP or DOWN buttonsInno Pocket Roll System Menupress and hold the MENU button for at least 3 seconds to acti-vate. After you have set your desired show, it can be changedat any time using the UP or DOWN buttons.SOUN - Sound Active mode.1. Press the MENU button until “SOUN” is displayed, pressENTER.2. The display will show either “ON” or “OFF”. Press the UP orDOWN buttons to select “ON” to activate sound active mode,or “OFF” to deactivate sound active mode.3. Press ENTER, then press and hold the MENU button for atleast 3 seconds to activate.SENS - In this mode you can adjust the sound sensitiv-ity.1. Press the MENU button until “SENS” is displayed, pressENTER.2. A number between 0-100 will be displayed. Press the UP orDOWN buttons to adjust the sound sensitivity. 0 being the leastsensitive, and 100 being the most sensitive.3. When you have found your desired setting press ENTER toconfirm.DIND - In this mode you can select the dimmer curve.1. Press the MENU button until “DIND” is displayed, pressENTER.2. The current dimmer curve setting will be displayed.3. Press the UP or DOWN buttons to find your desired dimmercurve and press ENTER to confirm. See the Dimmer Curve Charton page 19 for more information.Inno Pocket Roll System Menu