ADJ INNO POCKET ROLL User Instructions

Also see for INNO POCKET ROLL: User manual User instructions

ADJ Products, LLC - www.adj.com - Inno Pocket Roll Instruction Manual Page 15ADJ Products, LLC - www.adj.com - Inno Pocket Roll Instruction Manual Page 14Operating Modes: The Inno Pocket Roll can operate in threedifferent modes. In each mode you can run the fixture as astand alone fixture or in a master/slave confiugration. This nextsection will detail the differences in the operating modes.• Sound Active mode -The fixture will react to sound, chasing through the built-in programs.• Show mode -The fixture will run one of 12 shows.• DMX control mode -This function will allow you to control each individual fixtures traitswith a standard DMX-512 controller.Universal DMX Control: This function allows you to use a Elation®universal DMX-512 controller to control the chases and patterns,dimmer and strobe. A DMX controller allows you to create uniqueprograms tailored to your individual needs.1. The Inno Pocket Roll has 6 DMX Channels. See pages 17-18 fordetailed description of the DMX values and traits.2. To control your fixture in DMX mode, follow the set-up procedureson pages 5-7 as well as the set-up specifications that are includ-ed with your DMX controller.3. Use your DMX controller’s faders to control the various DMX fix-ture traits.4. Follow the instructions on page 9 to set the DMX address.5. For longer cable runs (more than a 100 feet) use a terminator onthe last fixture.6. For help operating in DMX mode consult the manual includedwith your DMX controller.Sound Active Mode: This mode allows either a single unit or severalunits linked together, to run to the beat of the music.1. Press the MENU button until “SOUN” is displayed, and pressENTER. Press the UP or DOWN buttons so that “ON” is dis-played and press ENTER.2. To adjust the sound sensitivity level press the MENU button until“ SENS” is displayed, and press ENTER. Use the UP or DOWNbuttons to adjust the sensitivity level, “0” being least sensitive,“100” being the most sensitive. Press ENTER to set your level.Inno Pocket Roll OperationTo enter the offset adjustment submenu, press the ENTER button forat least 5 seconds. In this submenu you are able to adjust the panhome position and gobo wheel position.PAN - Adjustment of the pan position.1. Press the ENTER button for at least 5 seconds, then press the UPor DOWN buttons so that “PAN” is displayed, press ENTER.2. Use the UP and DOWN buttons to make your adjustments, andthen press ENTER to confirm. Press the MENU button for one secondto exit.GOBO - Adjustment of the gobo position.1. Press the ENTER button for at least 5 seconds, then press the UPor DOWN buttons so that “GOBO” is displayed, press ENTER.2. Use the UP and DOWN buttons to make your adjustments, andthen press ENTER to confirm. Press the MENU button for one secondto exit.Inno Pocket Roll Offset Adjustment Menu