ADJ Products, LLC - www.adj.com - Ikon Profile User Manual Page 8 ADJ Products, LLC - www.adj.com - Ikon Profile User Manual Page 9LED - With this function the LED display will turn offafter 2 minutes.1. Press the MENU button until “LED” is displayed, pressENTER.2. The display will show either “ON” or “OFF”. Press the UP orDOWN buttons to select “ON” to keep the LED display on atall times, or “OFF” to allow the LED display to turn off after 2minutes. Press any button to turn on the LED display again.3. Press ENTER to confirm and exit.DISP - This function will reverse the display 180º.1. Press the MENU button until “DISP” is displayed, pressENTER.2. Press the UP button to select “DISP” to activate this func-tion, or “DSIP” to deactivate this function.3. Press ENTER to confirm.MANU - In this submenu you are able to test the dimmer,and strobe.1. Press the MENU button until “MANU” is displayed, pressENTER.2. Use the UP and DOWN buttons to scroll through the variousfunctions able for testing. Once you have found your desiredfunction you would like to test press ENTER.3. After you have pressed ENTER, use the UP and DOWN but-tons to adjust the values and test the function. To exit press theMENU button.TEST - This function will run a self test program.1. Press the MENU button until “TEST” is displayed, pressENTER.2. The fixture will now run a self test.TEMP - With this function you can check the tempera-ture of the fixture.1. Press the MENU button until “TEMP” is displayed, pressENTER.2. The fixture temperature will now be displayed. Press MENUto exit.FHRS - With this function you can display the runningtime of the unit.1. Press the MENU button until “FHRS” is displayed, pressENTER.2. The display shows the running time of the unit. Press MENUto exit.VER - Use this function to display the Software version ofthe unit.1. Press the MENU button until “VER” is displayed, pressENTER.2. The display will show the software version.Ikon Profile System Menu Ikon Profile System Menu