ADJ Ikon Profile User Instructions

Also see for Ikon Profile: User instructions

Contents

fixture cleaning

ADJ Products, LLC - www.adj.com - Ikon Profile User Manual Page 10The Ikon Profile gobo can be interchanged at any time and allowsyou to customize your system.To replace gobo;1. Gently slide the gobo housing out of the top of unit. The gobohousing is located in front of the top flag.2. Once the gobo housing has been removed, remove the retainingring that holds the gobo in. This can easily be done using needlenose pliers.3. Remove and replace the gobo with your desired replacement.Reinsert the retainer ring, and make sure the ring rests firmlyagainst the gobo.4. Slide the gobo assembly back into place.Ikon Profile Gobo ReplacementIkon Profile DMX Values & TraitsChannel Value Function1 STROBING/SHUTTER0 - 7 CLOSED8 - 15 OPEN16 - 131 STROBE SLOW - FAST132 - 139 OPEN140 - 181 FAST CLOSE - SLOW OPEN182 - 189 OPEN190 - 231 SLOW CLOSE - FAST OPEN232 - 239 OPEN240 - 247 RANDOM STROBE248 - 255 OPEN2 0 - 255 MASTER DIMMER 0% - 100%3 DIMMER MODE0 - 20 STANDARD21 - 40 STAGE41 - 60 TV61 - 80 ARCHITECTURAL81 - 100 THEATRE101 - 255 DEFAULT DIMMER SETTINGIkon Profile Adding a Color GelA color gel (not included) can be added to the front of the Ikon Profileand can be interchanged at any time. This allows you to customizeyour system.To add a color gel;1. Locate the color gel frame at the front of the unit. Slide the springlever back and slide the gel frame out of the holder.2. Once the gel frame has been removed slide your desired color gelinto the middle of the frame.3. Slide the spring back and slide the gel frame into place.ADJ Products, LLC - www.adj.com - Ikon Profile User Manual Page 11Ikon Profile CAD Drawing