ADJ MB DMX II User Instructions

Also see for MB DMX II: User manual

Contents

ADJ Products, LLC - www.adj.com - MB DMX II™ Instruction Manual Page 3MB DMX II Safety PrecautionsADJ Products, LLC - www.adj.com - MB DMX II™ Instruction Manual Page 4Safety Issues:• To reduce the risk of electrical shock or fire, do not expose thisunit rain or moisture• Do not spill water or other liquids into or on to your unit• Do not attempt to operate this unit if the power cord has beenfrayed or broken• Do not attempt to remove or break off the ground prong fromthe electrical cord. This prong is used to reduce the risk ofelectrical shock and fire in case of an internal short• Disconnect from main power before making any type of connection• Do not remove the cover under any conditions. There are no userserviceable parts inside• Never plug this unit in to a dimmer pack• Always be sure to mount this unit in an area that will allow properventilation. Allow about 6” (15cm) between this device and a wall• Do not attempt to operate this unit, if it becomes damaged• This unit is intended for indoor use only, use of this productoutdoors voids all warranties• During long periods of non-use, disconnect the unit’s main power• Always mount this unit in safe and stable matter• Power cords should be routed so they are not likely to be walkedon, pinched by items placed upon or against them.• Heat -The appliance should be situated away from heat sourcessuch as radiators, heat registers, stoves, or other appliances(including amplifiers) that produce heat.• The fixture should be serviced by qualified service personnel when:A. The power-supply cord or the plug has been damaged.B. Objects have fallen, or liquid has been spilled into the appliance.C. The appliance has been exposed to rain or water.D. The fixture does not appear to operate normally or exhibits amarked change in performance.General Instructions: To optimize the performance of this product,please read these operating instructions carefully to familiarize your-self with the basic operations of this unit. These instructions containimportant safety information regarding the use and maintenance ofthis unit. Please keep this manual with the unit, for future reference.Unpacking: Thank you for purchasing the MB DMX II by ADJ Products, LLC.Every MB DMX II has been thoroughly tested and has been shippedin perfect operating condition. Carefully check the shipping carton fordamage that may have occurred during shipping. If the carton appearsto be damaged, carefully inspect your fixture for any damage and besure all accessories necessary to operate the unit has arrived intact. Inthe case damage has been found or parts are missing, please contactour toll free customer support number for further instructions. Do notreturn this unit to your dealer without first contacting customer sup-port.Introduction: The MB DMX II is a unique intelligent mirror ball motorthat may be operated in three modes; DMX-512, Stand-Alone, or Master/Slave. The MB DMX II allows you to control the operation of a mirrorball motor as well as lights via DMX operation. You may also link sev-eral MB DMX II motors together to obtain universal speed and rotation.An optional MINI/C black out controller may be purchased separately.Customer Support: ADJ Products, LLC provides a toll free cus-tomer support line, to provide set up help and to answer any questionshould you encounter problems during your set up or initial operation.You may also visit us on the web at www.adj.com for any commentsor suggestions. Service Hours are Monday through Friday 8:00 a.m. to4:30 p.m. Pacific Standard Time.Voice: (800) 322-6337Fax: (323) 582-2941E-mail: support@americandj.comWarning! To prevent or reduce the risk of electrical shock or fire, donot expose this unit to rain or moisture.Caution! There are no user serviceable parts inside this unit. Do notattempt any repairs yourself, doing so will void your manufactureswarranty. In the unlikely event your unit may require service pleasecontact your nearest ADJ dealer.MB DMX II General Information