ADJ Products, LLC - www.adj.com - MB DMX II™ Instruction Manual Page 12ADJ Products, LLC - www.adj.com - MB DMX II™ Instruction Manual Page 11MB DMX II Breaker ResetMB DMX II MountingMounting: The MB DMX II ships with a built-in rigging point andtwo large holes in the base of the unit (that are to be used for safetycables). The rigging point is located on the top of the unit. This riggingpoint is secured to the fixture by two large Phillips screws. When therigging point is not to be used and when the fixture is shipped from themanufacture, the rigging point is shipped inverted (inside the top of theunit). When the fixture is to be hung by truss or other means, pleaseuse the rigging point and secure the fixture with safety cables. Alwaysbe sure to firmly secure the rigging point to the unit. The MB DMX II isto mounted in bottom-up position to a ceiling or may hung from trussusing a C-Clamp rated at 50 pounds or greater.This unit is equipped with a built-in safety breaker. This breaker isdesigned to close the power circuit in the event of an internal shortor power surge. This will reduce the risk of electrical shock or fire andprotect the circuitry. To reset the breaker, push the breaker button inuntil you hear it “pop” back in to place. If the breaker continues to pop,stop using the unit and contact our customer support team, the unitmay need to be returned for service.MB DMX II MINI/C ControlBlackout Button30 Foot Extension CableBlackout IndicatorOptional MINI/C (Not Included):The optional MINI/C controller allowsall units linked together to blackout.This unit will only blackout the fixturesand will not change or select differentprograms.Discontinued October 2016MB DMX II UC IR & Airstream App ControlREMOTE ON/OFFCLOCKWISE ROTATIONCOUNTER-CLOCKWISEROTATIONPOWER OUT ON/OFFSTROBINGROTATION SPEED CONTROL1-8 = FAST - SLOW9 = PAUSE ROTATIONSTROBE SPEED CONTROLSOUND ON = 1Hz (Slow)SHOW 0 = 3.5Hz (Medium)SOUND OFF = 7Hz (Fast)Added Support in November 2016